What is the Garment Sample Process?

We are entering the era of garment sample processing, and this is the first article we have written on this subject.

What is garment sample process?

In the garment manufacturing industry, there is a large number of steps taken by factories and wholesalers to identify, process and save garments, as well as ensure that garments are of high quality.

In the process, a lot of labour and physical labour is involved, and a lot can go wrong.

But it is very common to have quality problems in garment manufacturing.

In addition, there are different ways of handling garments in different regions.

In some places, for example, the process for sorting and packaging clothing is very complicated and time-consuming.

For example, in Europe, there exists a system for sorting clothing and packaging textile, which is much more complicated and expensive than for garment manufacturing, according to the Worldwatch Institute.

But for a garment manufacturer, it can be done in a few minutes by a machine.

And this is exactly what we do in garment processing.

Garment process: how it works 1.

Garments are cut and sewn at a factory.


The garment is cut and placed into a bag.


A machine removes the lining and fabric and separates the garment into its parts, such as seams and hemming.


The fabric is removed from the garment and woven into the final garment.


The sewing machine is turned on and the sewing begins.


After the garment has been sewn, it is then cut and sealed in a bag or a bag fitted with a fabric sleeve.


The garments are then sent to the manufacturer for final fitting, stitching and cutting.

The process takes about 3-5 minutes, according, according the manufacturers specifications.

In fact, the production process is so simple that most of the garment manufacturers are unaware of it.

According to the American Institute of Certified Fashion Technicians, it takes only 15 minutes to finish a garment, according its specifications.

And in Europe this process takes no longer than 1 hour, according manufacturers specifications, according The Times.

In other words, in less than 30 minutes, a garment is produced, packaged and shipped to the customer, which means that the garments are not damaged or wasted.

And if the garment is damaged or left in a state that is not intended, it will not be produced or sent.

It can be recycled or reused in other fashion products, such the garment can be reused for other garments.

Garmentation process: what to look for in a garment sample article 1.


In this process, the machine separates the fabric into its different parts, according according to manufacturers specifications (e.g. fabric, thread and yarn, etc).



The machine separates, and the yarn is then woven into a fabric, according manufacturer specifications.

3: Thread.

The thread is separated, and then the fabric is woven into it, according manufactures specifications.

4: Stitch Pattern.

The pattern is separated and woven, according specifications.

5: Size.

The size is separated into its two parts, depending on the specifications of the manufacturers.

6: Color.

The color of the fabric varies depending on manufacturers specifications and the quality of the thread.

7: Texture.

The texture varies depending upon the quality and thickness of the fabrics.

8: Finish.

The finish varies according to whether it is sewn or not.

The finished garment can then be sent to a customer.

And there are many ways to test and improve a garment’s finish.

The final product may look different from the original, according factory specifications.

For instance, there may be a slight change in the pattern, or a slight difference in the color of a fabric.

The end result of the production of a garment can differ from the final product that is received from a customer, according product specifications.

The quality of fabrics used in a finished garment is also considered by the manufacturers, according company specifications.

Some examples of these types of quality issues: Fabric: fabric quality and quality control in the garment factory The quality and safety of the finished product in the factories are usually checked in several different ways.

The factories are inspected by quality control inspectors who are also inspectors of garment factories.

The inspectors inspect the quality control of the factories and factories equipment and the manufacturing processes.

If there are problems with the quality or safety of a product, the inspectors can refer the matter to a company’s quality control department, according factories specifications.

This is a procedure that is carried out by the quality management department of the manufacturing company.

This procedure involves checking the manufacturing process and inspecting the factory.

It is a formal and continuous procedure.

If a company has problems with a garment factory’s quality or manufacturing process, it should contact the company directly, according companies specifications.

If the inspection reveals problems, the inspection team of the factory can contact the factories quality control officers to investigate.

If, however, the factory is not satisfied with the inspection report, it may refer the issue to